The Glock Operator's Tool

The 5 in 1 Tool

For All Glock Models

The G.O.T. was designed out of our own need to have a proper tool for maintaining our own Glocks- whether it be for cleaning and minor maintenance or full assembly and disassembly.

Get Your G.O.T.

The Glock Operator’s Tool is designed to be the one solution for maintaining any Glock.

Metal Punch

Remove pins, among other functions, similar in function to Glock’s own armorer tool.

Firing Pin Channel Assist

Holds the firing pin assembly securely while you disassemble it- no more springs and cups flying.

Magazine Plate Removal Tool

Located on each side, this feature works on ALL Glock magazines- .380 included!

Angled Edges with Purpose

The angled edges at the rear are used to clean the slide rails. The angled edges at the front remove the back strap on Gen 4 models- polymer to polymer to minimize potential damage.

The All in One Glock Tool

Not Just A Punch

The punch is clearly the basis for the tool- but with the other features we include in this all in one tool, just put it in your range set up and you’re done! One tool for all your Glocks. When you experience how quickly and efficiently you can maintain your Glocks, you will wonder where a tool like this has been for all these years.

glock tool
glock armorers tool
glock firing pin tool
glock firing pin removal tool
glock magazine plate removal tool
Agency Ready

Designed by Law Enforcement

Code9 was founded by John C. And Rob B. We are both former police officers who took a leap of faith and ventured into a world where our visions could be realized. The G.O.T. is our first product release and it is the beginning of our vision. We want to be a conduit for the great ideas that are often born in all of our minds, that many times we create and then push aside, to become a reality.

The G.O.T. is Made in the USA

We WARRANTY the G.O.T. for your lifetime. Period.

Quick Overview 1:37

Just a quick overview video of the Glock Operator’s Tool.

Features

Metal Punch

The Tool Core

A metal punch to remove pins, among other functions, similar in function to Glock’s own armorer tool.

Angled Edges

Located Front & Rear

One angled edge to clean the slide rails- no more q-tips or improvised sharp, thin edges to get into the channel! Another edge to remove the back strap on Gen 4 models- polymer to polymer to minimize potential damage.

Magazine Bottom Plate Removal

All Glock Magazines

A universal magazine plate removal feature that works on ALL Glock magazines- .380 included!

Firing Pin Channel Assist

One of the Best Features

The incredible firing pin channel assist which holds the firing pin assembly securely while you disassemble it- no more springs and cups flying across the room as you attempt to hold it all together!

Get Your G.O.T.

The G.O.T, or Glock Operator’s Tool, is a 5 function multi-tool for assembly/ disassembly/cleaning of ALL Glock pistols and magazines. Now Used By Arapahoe County Sheriff and Cherokee County Sheriff. Lifetime Warranty, Made in the USA, Patent Pending.

Sure, one can do it all with only a single tool (a punch), but one appreciates some basic purpose-built tools that make the job easier. The GOT is just that, a multi-tool that makes the most annoying portions of Glock assembly/disassembly smooth and easy.

NATHAN SThe Firearms Blog